welcome to Haiyuan water treatment Co. Ltd English|Spainsh|Online message
> Blog

The current position:Home > Blog

  • How to clean 4040 reverse osmosis membrane

                HYWATER         Deionized Water System

    How to clean 4040 reverse osmosis membrane The 4040 reverse osmosis membrane is mostly common used in reverse osmosis water treatment system, and after a period of operation it need to be replaced or cleaned. Regular cleaning can help to restore the performance of reverse osmosis membrane, to better ensure the pro···
    Read More
  • Design principle & Operation process of Multigrade filter

                HYWATER         Water filtration system

    Design principle & Operation process of Multigrade filterThe Multigrade filter is a process of clarifying water by using one or several kinds of filter media to remove suspended solids from the water with high turbidity under a certain pressure. The commonly used filter material is quartz sand, anthracite, manganes···
    Read More
  • The RO membrane cleaning manual of 3TPH RO Plant

                HYWATER         Deionized Water System

    The RO membrane cleaning manual of 3TPH RO Plant RO membrane Function:Remove all harmful substances, make sure the treated water can meet the pure water standard.The most suitable temperature of RO membrane is 5℃~35℃, it is the best to control water temperature at 20℃-25℃.Please pay attention to check the feed···
    Read More
  • Installation of RO membrane

                HYWATER         Reverse Osmosis plant/system

    How to install and disassemble the RO membraneReverse osmosis membrane is the core component of RO system. Normally quartz sand filter, activated carbon filter and security filter will be used as pre-treatment to protect the RO membrane. The service life of the reverse osmosis membrane is about 2--5 years. When the out···
    Read More
  • Commercial Reverse Osmosis System Maintenance Manual

                HYWATER         Deionized Water System

    Commercial Reverse Osmosis System Maintenance Manual VI. Pressure drop increases after regular running Pressure drop increases after regular running, and it causes the decrease in permeate flow or rejection rate. Pressure drop refers to the pressure difference between feed water and rejected water. ···
    Read More
  • Water Purification System Maintenance Manual

                HYWATER         Deionized Water System

    Water Purification System Maintenance Manual V. Decrease in Permeate Flow after Regular Running Permeate flow remains regular and rejection rate decreases after standardization. The causes of this failure include: 1. Leakage in O-ringA. If the O-ring is damaged by lubrication with certain ···
    Read More
  • Industrial Reverse Osmosis System Maintenance Manual

                HYWATER         Deionized Water System

    Industrial Reverse Osmosis System Maintenance Manual IV. Decrease in Permeate Flow after Regular Running In case the permeate flow of RO system decreases after standardization, the cause of failure can be sought according to the following situations: 1. If the decrease of permeate flow occurs in the···
    Read More
  • RO System Maintenance Manual

                HYWATER         Deionized Water System

    RO System Maintenance Manual III. Troubleshooting of Failures of RO System Occurring after Regular Running Such failures of RO System usually exhibit at least one of the following situations: (1) The permeate flow decreases after standardization, and it is usually necessary to increase the oper···
    Read More
  • RO Plant Maintenance Manual

                HYWATER         Deionized Water System

    RO Plant Maintenance ManualII. Low Rejection Rate and High Conductivity of Product Water (1) RO Plant Deviation in Readings of Instrument and Meter The conductivity meter (or TDS meter) not calibrated before use has a considerable deviation of readings, thus figuring out a lower rejection rate.···
    Read More
  • RO Machine Maintenance Manual

                HYWATER         Deionized Water System

    RO Machine Maintenance ManualI. Low Permeate Flow and High Pressure This situation may be brought about by the following causes: (1) RO machine Deviation in Readings of Instrument and Meter The pressure gauge or flow meter not calibrated prior to use may bring about inaccurate readings. Th···
    Read More
  • Reverse Osmosis System Installation Manual

                HYWATER         Reverse Osmosis plant/system

    Reverse Osmosis System Installation Manual 1. Reverse Osmosis System Piping connection(1) Place the system on the smooth ground which is near the water source and power supply.(2) Connect the concentrated water outlet of Sand filter+ Activated carbon filter+ Water softener+ RO system to the sewer.(3···
    Read More
©2121 HY water, Ltd All Rights reserved.
Industrial & drinking Reverse osmosis water purification system,Seawater desalinaton plant in Africa, Asia, Europe, South America, Australia |Made in China by Haiyuan. an ISO9001:2019 Certified Company Add: Xiansha Gaobu Town,Dongguan city,Guangdong,China|+86(769)88706055| Email:sales@seawaterroplants.com
HaiyuanHaiyuanHaiyuan
Need Help? Chat with us
haiyuan