Wechat/Whatsapp:
+8613798883773
Wechat/Whatsapp:
+8613798883773
500PLH Reverse osmosis systems seawater| Seawater ro system
A. Reverse osmosis systems seawater design basis
_ Raw water : seawater with TDS 35000 ppm
_ Production capacity: 25 litres/hr
_ Product water : for domestic water
_ Voltage and frequency: 1PH 220V/50HZ,2.05KW
B. Seawater ro system relative parameters
- Desalination rate: 95%
- Recovery rate: 30%
- Bacterial remove rate: 99.99%
- Pipe line used: PPR special for desalination.
- Meters and fittings: special for desalination use.
HY-SWRO-500LPH | |||
Flow rate | 10000L/D=500L/hr | Recovery rate | 20% |
Applicable power | 380V/50HZ 3 phase | Rated power | 4.75KW |
Feedwater TDS | <45000ppm | freshwater TDS | <600ppm |
Working pressure | <6Mpa | operating temperature | 5-45℃ |
Feedwater residual chlorine | <0.1ppm | Feedwater SDI | <5 |
Feedwater turbidity | <1NTU | Feedwater PH value | 3-10 |
Equipment specification | 1.2X1.2X1.65(m) | Net weight | 240Kg |
Packing specification(Plywood) | 1.3X1.3X1.75(cm) | Gross weight | 300Kg |
(The picture of Reverse osmosis systems seawater)
C. Reverse osmosis systems seawater processe flow
Sea water tank →Feed water pump →Sand filter → Scale inhibition→ 5μSecurity filter →1μSecurity filter → High-pressure pump → RO system (CIP)→ Product water tank
Reverse osmosis systems seawater stage introduction
S.N | Item | Application |
1 | Raw water tank | Store water, buffering pressure, overcome instability of supplying water by pipe,ensure to supply water stably and continuously for whole system |
2 | Raw water pump | Provide needed pressure for every filtrator. |
3 | Multimedia filter | We use filber-glass or stainless steel vessel as housing, fill quarts sand and anthracite, it can filter big particles impurities, suspended substances, colloids etc. |
4 | 5μm Security filter/cartridge filter | Prevent large particles, bacteria,viruses into RO membrane, accuracy 5μm |
5 | 1μm Security filter/cartridge filter | Prevent large particles, bacteria,viruses into RO membrane, accuracy 1μm |
6 | High pressure pump | Provide needed working pressure for RO system, ensure production capacity of pure water. |
7 | RO system | Can remove particles, colloids, organic impurities, heavy metal ions, bacteria, virus, heat source ect. Harmful substances and 99% dissolved salts. |
D. Seawater ro system advantages
1.SS316 frame, beautiful appearance, durable in use.
2. Stainless steel Swivel caster, durable in use, easy to more device.
3. 5 micron filter. It can remove the sediment, Alga, suspended solid.
4. 1 micron fold filter element. It will intercept the more than absolutely 5 micron partical. To avoid them into High pressure pump cause the pump be damaged.
5. Four stainless steel adjusting feet, whether the ground is flat, the equipment can be placed upright, easy to use.
6. We look for and customize suitable equipment components, concentrate them onto a frame, make the equipment compact and portable.
7. We are very cautious to select components, strictly passed through 1.5 times working pressure test; requirement of material: high pressure resistant, corrosion resistance, hygiene grade.
E. Why need to provide the source water quality report?
1.The source water quality report can help engineers better understand the parameters of various indicators n the raw water, like the amount of all kinds of ions, bacteria, etc. Provide feasibility solution based on various parameter of raw water.
2. TDS(Total dissolved solid) and residual chlorine value is very import. before designing the proposal, engineers select high different pressure pumps with different pressures based on TDS value to make sure that the system can produce the clean water normally. Select the appropriate stainless steel material based on the residual chlorine to avoid the water leakage caused by corrosion.
3.From water analysis report can see the iron and manganese, turbidity, bacteria whether exceed the standard. Engineers can design the process flow chart and solution which best fit the demand to help reduce unnecessary expense which can help customers save the cost.
4. Engineers design the reverse osmosis systems seawater| Seawater ro system suitable proposal based on raw water quality report and product water purpose/standard which can operate normally and best fit the customer demand.
BTW: If source water is Municipal tap water or clean reservoir water or spring water no need report.
But please inform us the water characteristic.
If you have any Reverse osmosis systems seawater|Seawater ro system inquiry and question for Price, Application, Properties of products, etc. Please don’t hesitate to contact us.
Email: Sales@seawaterroplants.com
Mob&WhatsApp&WhatChat : +8618825874379 or +8613922972795
