DI water system,DI water plant  double RO edi,industrial  DI water

A: DI water system Raw water plant normally parameters

1. WHO water or Brackish water TDS <1000

2. Out water:Resistivity ≥ 15-18MΩ.cm

3. Operating Pressure: < 300 psi

4. Maximum Recovery: 99% - 100%

5. Desalination rate: 99%

6. Operating Temperature: 5-35 ºC

7. Minimum Inlet Pressure: 30 psi

8. Design Temperature: 25 ºC

Double RO with EDI  for wash battery water photo

B: Industrial DI water product description

-Deionization as defined by the International Organization for Standardization ISO / TC 147 is defined as: "Deionized water completely or incompletely removes ionic substances, mainly referring to the use of ion exchange resins (after cation bed, anion bed, mixed bed exchange) treatment The advantages of deionized water prepared by cation bed, anion bed, and anion-cation mixed bed exchange are strong ion removal ability and high purity; however, the equipment operation is complicated, non-dielectrics such as organic matter cannot be removed, and a small amount of exchange resin is dissolved in water. The current process is mainly made by the method of RO reverse osmosis + mixed bed or double bed or EDI method. The advantages are physical desalination, no chemical regeneration, stable effluent water quality, continuous production, convenient maintenance, and environmental protection.

-Deionized water: Deionized water prepared by non-heat treatment using ion exchange method, reverse osmosis method, ultrafiltration method, EDI electric desalination method. That is, deionized water refers to pure water after removing impurities in the form of ions. Deionized water is commonly referred to as "ultra-pure water" or "18 megohm water" in the semiconductor industry.

C: In order send you correct information please tell me below information 

1. How many liters outlet water per hour do you require?(500L/H,1000L/H, etc.)

2. Where is the source water from? (Eg,well water/borehole water, river water. etc.)- Do you have water analysis result or know the water quality? (The TDS=total dissolved solid, Fe, Mg, Hardness etc. whether over proof etc).

3. After treated, The water meet WHO drinking water standard, or as per bottle water standard or other industrial purpose?

4. Your local power is 380V/50hz 3phase or 380V/60Hz 3 phase, 440/60hz 3 phase or other voltage?

BTW: If source water is Municipal tap water or clean reservoir water or spring water no need report.

But please inform us the water characteristic.

Please contact us!

Email: Sales@seawaterroplants.com

Mob&WhatsApp&WhatChat:  +8613922972795

DI water system based on different capacity and treated water standard or purpose. we will supply the Optimization solution for client.

Deionized water treatment plant  1000LPH