Ion exchange ro system |DI  water plant|Ion exchange filter

A:  Ion exchange ro system normally parameters

1. WHO water or Brackish water TDS <1000

2. Operating Pressure: < 45 psi

3. Maximum Recovery: 98% - 100%

4. Desalination rate: 99%

5. Operating Temperature: 5-35 ºC

6. Minimum Inlet Pressure: 30 psi

7. Design Temperature: 25 ºC

B: Ion exchange ro system product description

Deionized water: Deionized water prepared by non-heat treatment using ion exchange method, reverse osmosis method, ultrafiltration method, EDI electric desalination method. That is, deionized water refers to pure water after removing impurities in the form of ions. Deionized water is commonly referred to as "ultra-pure water" or "18 megohm water" in the semiconductor industry.

C:  DI water plant Preparation process of deionized water plant

Flow chart 1:

Raw water → Multi-media filter → Activated carbon filter → Precision filter → Cation bed → Aniton bed → Mixed bed → Rear security filter → Water point (Below photo is this process)

Flow chart  2:

Raw water → Multi-media filter → Activated carbon filter → Precision filter → Reverse osmosis equipment → Mixed bed → DI water tank → DI water pump → Rear security filter → Water point

Flow chart 3:

Raw water → Multi-media filter → Activated carbon filter → Precision filter → Reverse osmosis  → Electric deionization (EDI) → DI water tank → DI water pump → Rear security filter → Water point

Ion exchange resin filter 

Ion exchange ro system |DI  water plant|Ion exchange filter more information please tell me below information.

In order send you correct information please tell me below information.

1. How many liters outlet water per hour do you require?(500L/H,1000L/H, etc.)

2. Where is the source water from? (Eg,well water/borehole water, river water. etc.)- Do you have water analysis result or know the water quality? (The TDS=total dissolved solid, Fe, Mg, Hardness etc. whether over proof etc).

3. After treated, The water meet WHO drinking water standard, or as per bottle water standard or other industrial purpose?

4. Your local power is 380V/50hz 3phase or 380V/60Hz 3 phase, 440/60hz 3 phase or other voltage?

BTW: If source water is municipal tap water or clean reservoir water or spring water no need report.

But please inform us the water characteristic.

Please contact us!

Email: Sales@seawaterroplants.com

Mob&WhatsApp&WhatChat: +8613544774483 or +8613922972795