Desalination brackish water|Brackish water ro system|Brackish water process reverse osmosis ro 20TPH for irrigation

Fresh water is needed for irrigation water in Africa and the Middle East, and fresh water resources are increasingly scarce. The vast majority of professional growers have exploited drilling water and groundwater for irrigation. Most of these ground water and well water are polluted, and the water contains high salt content. Suitable for irrigation, then brackish water (surface water and groundwater with a salt content of 1500 ~ 5000mg / L) must be processed into fresh water by reverse osmosis before it can be used for irrigation.

A.Desalination brackish water introduction

1. Source water: TDS8000mg/l
2. System working Voltage/Power: 380V/50HZ  3phase  48KW 
3. Outlet Purified water standard: Meet WHO drinking standard

4. Plant size: L13×W1.5×H2.6(m)

B.Brackish water ro system control method:

Whole system use full automatically control model, both model can be exchanged accordingly. Sand filter and Carbon filter with auto and manual back flush.The RO system automatic flushing at each start-up and shutdown. High water level auto stop, low water level auto start.Pump protected without water. Protected when no power, poor power, larger electrical current, leakage, short circuit.

C.Brackish water process reverse osmosis flow chart

Feed water tank-->Feed water pump-->Multimedia filter-->PP filter-->High pressure pump-->RO system-->RO tank-->Cleanig system(alternative)-->Product water tank

D.Desalination brackish water analysis about process

Brackish water from the water pump into the quartz sand (multi-media filter) and activated carbon filtration system filtration. Filtered water after water quality reduction, PH adjustment and scale inhibitor added after the access to the precision and security filtration system, filtered low pressure brackish water all the way into the high-pressure pump pressure, the other way into the pressure exchange energy recovery device, after pressurized pump pressurized with high pressure pump into the reverse osmosis membrane reactor system. High-pressure brackish water in the membrane reactor under the treatment of the formation of fresh water through the membrane after water quality adjustment into the fresh water tank storage. The rest of the high pressure concentrated water enters the pressure exchange energy recovery unit to recover the energy after discharge.

E.Brackish water ro system product list

In order to send you correct information please tell me below information 

1. How many liters outlet water per hour do you require?(500L/H,1000L/H, 50m3/hr,etc.)

2. Where is the source water from? (Eg,well water/borehole water, river water. etc.)- Do you have water analysis result or know the water quality? (The TDS=total dissolved solid, Fe, Mg, Hardness etc. whether over proof etc).

3. After treated, The water meet WHO drinking water standard, or as per bottle water standard or other industrial purpose?

4. Your local power is 380V/50hz 3phase or 380V/60Hz 3 phase, 440/60hz 3 phase or other voltage?

BTW: If source water is Municipal tap water or clean reservoir water or spring water no need report.

But please inform us the water characteristic.

More inquiries related to Desalination brackish water|Brackish water ro system|Brackish water process reverse osmosis ro (Different source water and capacity with different design),please feel free to contact us! 

 E-mail: sales003@water-sy.com

 Wechat(WhatsApp): 008618825874379/008613922972795

Brackish water purification system 2TPH