Commercial industrial water filtration system

Haiyuan Water Treatment manufactures commercial and industrial water filtration system capacity RO system with of 10m3/hr to 50m3/hr capacities. This series is a much sought after system in large capacity commercial and industrial water filtration system, which require treated water on a continuous basis. They are especially suitable industrial and commercial facilities that require consistently pure drinking water supply to transform drinking water to high purity water for a variety of uses such as Pharmaceutical, Agriculture, Hotels, Hospitals, Municipal, Offshore, Marine, Military, Power and Energy, Boiler Feed Water, Food and Beverage etc.With more than 10 years expertise, you can get rest assured of dependable service, moderate price and high-quality solutions that last long providing you complete value for money.

1.Design basic：

Source water quality analysis report: TDS=10000ppm.

Source water:Deep well water

Production capacity: 20m3/hr

Voltage and Frequency: 380V/50HZ 3 phase

Recovery rate:70%

2. Client supply basic condition：

Plant size: 9.5m*1.2m*2.6m, required floor smooth, floor ground should have drain trench.  

Water quality basi steady, pressure steady.

User prepares the Source water& permeate water tank .

User power supply: 380/50HZ

3.Control method:

- Whole system use full/semi automatically control model, both model can be exchanged accordingly.

- Sand  Carbon filter & water softener with auto and manual back flush.

- The RO system automatic flushing at each startup and shutdown.

- High water level auto stop, low water level auto start.

- Pump protected without water.

- Protected when no power, poor power, larger electrical current, leakage, short circuit.

Process of commercial industrial water filtration system

Source water tank →Feed water pump → Multi-media filter →Anti-scaling dosing system→PP sediment filter →RO system →permeat tank→ Use point→ CIP system

Process introduction of commercial industrial water filtration system

(1). Storage /Source /Raw tank (User prepare)

With high, low water level control. Regulate water supply to the pre-treatment, prevent the effects of water insufficient, effective protect the work of booster pump.

(2). Feed water pump---Provide power for the sand & active carbon filter and RO system.

(3). Multi-media Sand filter

Use quartz sand of different particle size of multilayer to remove larger suspended

solids, sand, impurity etc. The tank is made of stainless steel, anti-acid and anti-alkali corrosion.

(4). Anti-scaling dosing system

It can reduce the water hardness and prevent RO membrane scale formation.

(5).PP sediment filter

Remove more tiny impurities, prevent sands &active carbon leakage, effective protect the RO membrane.  Features：PP material

(6). High press pump

Provide power for the RO membrane normal work, with high overheat protector, pressure controller.

(7) .RO system

Remove all the impurities in the water. Remove rate: 99.9%. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.

(8) .RO water tank---Store the RO production water for future use.( User prepare).

Detail list of 20m3/H commercial industrial water filtration system

More about the Commercial industrial water filtration system  

Please add Wechat/Whatapp +8613544774483 or +86 13922972795.

Or send Email: sales@seawaterroplants.com