Hollow fiber ultrafiltration membrane systems|Hollow fiber ultrafiltration membrane|Ultrafiltration system 1TPH

A.Hollow fiber ultrafiltration membrane systems design basis

1) Source water quality analysis report:COD600ppm,BOD300ppm

2) Output pure water quality:Meet bathroom water standard(Reuse)

3) Production capacity:1000L/H

4) Voltage and Frequency:Suitable for local voltage and frequency 220/60HZ 3phase

5) Plant size:L1*W0.6*H1.6(m)

6) User power supply:0.37KW

B.Hollow fiber ultrafiltration membrane flow chart

source tank →Feed water pump → multi- media filter(sands filter) → active carbon filter → water softener（or inhibitor dosing）→Cartridge/Security/Micro filter→Ultrafiltration system →purified tank→ UV sterilization

C.Ultrafiltration system product list

D.Hollow fiber ultrafiltration membrane systems application field

Drink pure water, mineral water, residential direct drinking water, beverages, beer, brewing, dairy industry, seawater desalination, brackish water treatment, etc.

1. It is suitable for making direct drinking water in communities, schools, factories and other units.

2. Can be used for the preparation of bottled water, mineral water and other filling water.

3. Concentrate and recover the useful solution of the aqueous solution in industrial production;

4. Pure water device is used as the first-level desalination equipment for high-purity water production. 

5.  Electronic industry water IC, silicon wafer, display tube and other electronic components rinse water

6. The pharmaceutical industry uses water infusions, injections, tablets, biochemical products, equipment cleaning, etc

7. Other process water Ultra pure water for automobile, home appliance coating, coated glass, cosmetics, fine chemicals, etc.

(The photo of Hollow fiber ultrafiltration membrane systems)

E. Hollow fiber ultrafiltration membrane advantages

Hollow fiber ultrafiltration membrane systems are more reliable than a conventional multi-media filter, which removed approximately 10 micron or larger of matter, where an ultrafiltration membrane pore size ranges from 0.01 to 0.10 micron. In addition to superior turbidity removal, UF membranes efficiently remove bacteria and most viruses.

1) Superior filtration performance with high flux

2) Very small nominal pore diameter (0.03 um)

3) Efficiently removes bacteria and viruses

4) Occasionally back washed and air scoured to boost performance and removing the fouling layer to extend operating life

5) Low fouling membrane modules

6) UF Outside-In or Inside-Out Configuration permits reduced plugging and higher solids loading

7) Basic, vertical, modular design permits low cost, compact systems

8) Effective membrane cleaning has a high chemical resistance and temperature tolerance

F.Our service

1.All the machine can be warranted for one year.

2.Can offer the engineer to overseas to offer the training.

3.Offer the technical support all the time.

4.Every machine before shipped will be test for some time to ensure without any problems.

5.Good production capacity, will arrange the shipment on time!

Why need to provide the source water quality report?

1.The source water quality report can help engineers better understand the parameters of various indicators n the raw water, like the amount of all kinds of ions, bacteria, etc. Provide feasibility solution based on various parameter of raw water.

2. TDS(Total dissolved solid) and residual chlorine value is very import. before designing the proposal, engineers select high different pressure pumps with different pressures based on TDS value to make sure that the system can produce the clean water normally. Select the appropriate stainless steel material based on the residual chlorine to avoid the water leakage caused by corrosion.

3.From water analysis report can see the iron and manganese, turbidity, bacteria whether exceed the standard. Engineers can design the process flow chart and solution which best fit the demand to help reduce unnecessary expense which can help customers save the cost.

4. Engineers design the Ultra filtration membrane systems suitable proposal based on raw water quality report and product water purpose/standard which can operate normally and best fit the customer demand.

BTW: If source water is Municipal tap water or clean reservoir water or spring water no need report.

But please inform us the water characteristic.

Hollow fiber ultrafiltration membrane systems based on different capacity and treated water standard or purpose. we will supply the Optimization solution for client.

Hollow fiber ultrafiltration membrane systems|Hollow fiber ultrafiltration membrane|Ultrafiltration system more related to information (different source water, capacity, voltage), please feel free to contact us!

Email: Sales@seawaterroplants.com

Mob&WhatsApp&WhatChat: +8618825874379 or +8613922972795

We will provide high-quality, all-round comprehensive professional services for project consulting, system design, manufacturing, installation and commissioning, personnel training, etc.